Lull 944E-42 Service Manual Manuel d'utilisateur télécharger pdf (Page 108)

100

101

Cab and Covers

4.4

Model 644E-42/944E-42 Rev. 6/04

4.3 OPEN CAB COMPONENTS

4.3.1 Seat and Seat Belt

a. Seat Removal

Note: Two types of seating are available on this vehicle,

a standard seat (1) and a seat with adjustable

suspension (4). Both seats can be removed and

installed using the same procedure. The seat belts (2)

for the standard seat are bolted directly to the seat riser

(3) whereas on the suspension seat (4), the seat belts

(5) are bolted to a bracket, which is attached to the seat

back. On the suspension seat, the seat belts have

additional support through the use of tethers (6). The

tethers are attached, at one end, to the seat belt

mounting hardware on the seat, and at the other end,

are bolted to the seat riser.

1. Park the vehicle on a firm, level surface. Level the

vehicle, ground the attachment, place the travel

select lever in the (N) NEUTRAL DETENT position,

engage the parking brake switch and shut the

engine OFF.

2. Remove the two capscrews (7), flat washers (8) and

spacers (9) securing the tethers (6) to the seat

riser (10).

3. Remove the elastic locknuts (11) and flat

washers (12) securing the seat (4) to the seat

riser (10). Carefully remove the seat (4) from the

cab.

4. If the seat is to be replaced: Remove the two

capscrews (13), washers (14), seat belt

assembly (5), spacers (15) and flanged nuts (16).

Transfer these parts and two tethers (6) to the

replacement seat with the seat out of the cab.

MU4660

MU1850

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 845 846

Commentaires sur ces manuels

Pas de commentaire

Lull 944E-42 Service Manual Manuel d'utilisateur Page 108

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Lull 944E-42 Service Manual