Lull 944E-42 Service Manual Manuel d'utilisateur télécharger pdf (Page 40)

100

101

General Information, Specifications and Maintenance

2.24

Model 644E-42/944E-42 Rev. 6/04

2.6.3 Lubrication Points (Grease Fittings)

Lubricants

When lubricating any component via the grease fittings,

use multi-purpose lithium-based grease with EP additives

that meets NLGI Grade 2 specifications. Products known

to meet these requirements include:

• AMOCO AMOLITH EP2

• ARCO LITHOLINE EP2

• BENZ MOLY-SERVICE EP2

• CHEVRON DUROLITH EP2

• CITGO H EP2

• GULF GULFCROWN EP2

• MOBILE MOBILUX EP2

• SHELL ALVANIA EP2

• SUN PRESTIGE 742EP

• TEXACO MULTIFAX EP2

Note: Refer to the appropriate Owners/Operators

manual for the maintenance schedule and checklist for

lubrication intervals and grease fitting locations.

2.6.4 Hydraulic System

a. Hydraulic Fluids

The hydraulic system is factory filled with ISO Grade 46

anti-wear hydraulic oil. When filling the hydraulic system,

use an anti-wear hydraulic oil meeting ISO Grade 46 with

-40° F (-40° C) pour point/ASTM viscosity SUS 215 at

100° F (38° C)) that meets the requirements of U.S.

ordinance specification MIL-L-2104C. Products known to

meet these requirements include:

ISO-46 HYDRAULIC OIL

• GULF HARMONY 46 AW

• AMOCO RYKON 46

• MOBIL DTE-25

• ARCO DURO AW S-215

• SHELL TULLUS 46

• BENZ PETRAULIC 46-7C

• SUN SUNVIS 821 WR

• CHEVRON AW HYDRAULIC OIL 46

• TEXACO RANDO HD 46

• CITGO PACEMAKER XD-46

b. Hydraulic System Capacity

System capacity ................................50.2 gal (190 liters)

Reservoir capacity.............................33.5 gal (127 liters)

2.6.5 Engine

a. Engine Fluids and Lubricants

1. Engine oil:

Diesel Engine Oil, SAE 15W40

For most climates, use 15W40 motor oil that at least

meets the recommended minimum manufacturers oil

specifications, as defined in their operator’s manual.

Additives are not necessary. In cold climates where

ambient (outside air) temperatures are consistently below

32° F (0° C), 10W30 motor oil can be used; however,

continuous use of low viscosity oil may cause premature

engine wear.

2. Cooling system (engine coolant):

In general, use a 50/50-mix of premium-quality ethylene

glycol (commonly referred to as “anti-freeze/anti-boil

over”) and water. Additives are not necessary.

3. Fuel:

In general, use No. 2 diesel fuel. From November 15 to

March 15 when operating in cooler climates where

ambient (outside air) temperatures are consistently at or

below 32° F (0° C), use a 50/50 mix of #1 and #2 diesel

fuels. Use good quality diesel fuel and change the fuel

filter regularly. Additives are not necessary.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 845 846

Commentaires sur ces manuels

Pas de commentaire

Lull 944E-42 Service Manual Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Lull 944E-42 Service Manual